CONNECTION & OPERATION
CAUTION : Never connect or disconnect parts of the display system when the system is powered up as this may cause serious
damage.
CONNECTION
Connection and usage is quite straight forward (it is useful to have the relevant connection diagram available at this time):
1.
2.
3.
4.
5.
6.
7.
8.
9.
LCD panel & Inverter: Connect the inverter (if it is not built-in the panel) to the CCFT lead connector of the LCD panel.
TTL type panels: Plug the signal cables direct to CN2, CN3 and CN4 (CN4 will not be used for 3x6-bit panel) on the
controller board. Plug the other end of cables to the LCD connector board (if connector board is required, otherwise the
signal can be direct plug to the LCD panel connector). Then plug the board connector to the LCD panel connector.
LVDS type panel s : The controller board has the built-in LVDS transmitter driver. Plug the LVDS cable to J3. Insert the
panel end of the cable the LCD panel connector.
Inverter & Controller: Plug the inverter cable to CNB1 and CNA1 (if necessary). Plug another end to the connector on
the inverter.
Function switch & Controller: Plug the OSD switch mount cable to CNC1 on the controller board and another to the
OSD switch mount.
LED & Controller: Plug in a 3-way with dual colour LED to connector LED1 on the controller board.
IR & Controller: Plug in a 3-way with IR sensor to connector IR1 on the controller board.
Jumpers & Switches: Check all jumpers and switches (S1, S1, SW3, SW4) are set correctly. Details referring the
connection diagram (a separate document) or the jumpers and switches setting table (in the following section).
Jumpers & Inverter & Panel voltage: Particularly pay attention to the settings of JA3, JA5, JA6, JB2 and JB3. JB2 & JB3
are used for inverter control (read inverter specification and information on the jumper table to define the correct settings).
JA3 & JA5 & JA6 are used for panel voltage input (read panel specification and information on the jumper table to define
the correct settings).
VGA cable & Controller: Plug the VGA cable to the connector P1 on the controller board.
10. Power supply & Controller: Plug the DC 12V power in to the connector PP5 or PP2/3. You can consider to use
DigitalView mating power cable P/N 426013800-3, 160mm for PP5 connection.
11. External panel power input : Plug power cable : P/N 426013700-3 for external panel power input (3.3 (max 7A) / 5V
(max 7A) / 12V (max 5A) / 18V (max3.5))
12. Power on: Switch on the controller board and panel by using the OSD switch mount.
13. Audio Board : The Audio Add-on Board P/N 416940020-3 can be used.
The red LED will light up when power on. The LED will change to green when VGA signal on.
General:
?
?
If you are using supplied cables & accessories, ensure they are correct for the model of panel and controller.
If you are making your own cables & connectors refer carefully to both the panel & inverter specifications and the section
in this manual, “Connectors, Pinouts & Jumpers” to ensure the correct pin to pin wiring.
PC SETTINGS
The controller has been designed to take a very wide range of input signals however to optimize the PC’s graphics performance
we recommend choosing 60Hz vertical refresh rate – this will not cause screen flicker.
OPERATION
Once the system has been connected and switched on there are a number of functions available to adjust the display
image as summarized in the following sections. The settings chosen will be saved for each mode independently.
6
相关PDF资料
426090200-3 CABLE SERIAL IN RS-232 CONN
426120410-3 CABLE OSD 12-WAY 610MM
4268-00 KIT EVAL FOR 4268 RF SWITCH
4270-00 KIT EVAL FOR 4270 RF SWITCH
4271-00 KIT EVAL FOR 4271 RF SWITCH
4272-00 KIT EVAL FOR 4272 RF SWITCH
4273-00 KIT EVAL FOR 4273 RF SWITCH
42742-03 KIT EVAL FOR 42742 RF SWITCH
相关代理商/技术参数
426013800-3 功能描述:电缆组件 PP5/12V Pwr Input 160mm 2.5mm conn RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规(AWG):20, 28 长度:0.305 m 颜色:Black, Red
426015100-3 功能描述:电缆组件 Cable Power-In 380mm RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规(AWG):20, 28 长度:0.305 m 颜色:Black, Red
426016100-3 功能描述:电缆组件 CHANNEL SEL CBL FOR DVC-RX. 100MM RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规(AWG):20, 28 长度:0.305 m 颜色:Black, Red
4260164702 制造商:DDP 功能描述:
4260-1647-22 制造商:Bourns Inc 功能描述:
426016900-3 功能描述:CABLE POWER IN 400MM 制造商:digital view inc. 系列:* 零件状态:在售 标准包装:1
42-602 制造商:Ideal Industries Inc 功能描述: